RedHat 5.6_x86_64 + ASM + RAW+ Oracle 10g RAC （二）-白红宇

RedHat 5.6_x86_64 + ASM + RAW+ Oracle 10g RAC （二）

阅读量：5856 次

发布时间：2019-06-19

本文共 13669 字，大约阅读时间需要 45 分钟。

三、安装配置

1.创建账户

在所有节点上创建所需账户

#groupadd –g 500 dba

#useradd -u 1001 -g oinstall -G dba oracle

#password oracle

nobody用户一般操作系统安装往后就存在，如果没有必须创建，该用户在安装完clusterware或RAC后执行一些扩展任务（extjob）

#id nobody

uid=99(nobody) gid=99(nobody) groups=99(nobody)

注意：

在所有节点上执行，并且所有节点上面的用户名、用户ID、组名、组ID必须相同。

2.创建目录

在所有节点上创建所需目录并赋予对应权限

#mkdir –p /home/oracle/orabase

#mkdir –p /home/oracle/orahome/product/10.2.0/db_1

#mkdir –p /home/oracle/orahome/product/10.2.0/crs

#mkdir –p /home/oracle/orahome/product/10.2.0/asm

#cd /home/oracle

#chmod –R 775 *

#chown –R oracle:oinstall *

3.配置环境变量

在JASON1机器上以oracle用户进入，编辑~/.bash_profile文件，添加如下内容：

export ORACLE_BASE=/home/oracle/orabase

export ORACLE_HOME=/home/oracle/orahome/product/10.2.0/db_1

export ORA_CRS_HOME=/home/oracle/orahome/product/10.2.0/crs

export ORA_ASM_HOME=/home/oracle/orahome/product/10.2.0/asm

export ORACLE_SID=JASON1

PATH=$PATH:$ORACLE_HOME/bin:$ORA_CRS_HOME/bin:$ORA_ASM_HOME/bin

export PATH

同样在在JASON2机器上以oracle用户进入，编辑~/.bash_profile文件，添加如下内容：

export ORACLE_BASE=/home/oracle/orabase

export ORACLE_HOME=/home/oracle/orahome/product/10.2.0/db_1

export ORA_CRS_HOME=/home/oracle/orahome/product/10.2.0/crs

export ORA_ASM_HOME=/home/oracle/orahome/product/10.2.0/asm

export ORACLE_SID=JASON2

PATH=$PATH:$ORACLE_HOME/bin:$ORA_CRS_HOME/bin:$ORA_ASM_HOME/bin

export PATH

4.配置hosts文件

在所有节点上，编辑/etc/hosts文件，最终内容如下：

JASON1节点

[oracle@jason1 ~]# vi /etc/hosts

# Do not remove the following line, or various programs

# that require network functionality will fail.

127.0.0.1 localhost.localdomain localhost

::1 localhost6.localdomain6 localhost6

192.168.12.241 jason1

192.168.12.242 jason2

10.10.10.241 jason1-priv

10.10.10.242 jason2-priv

192.168.12.243 jason1-vip

192.168.12.244 jason2-vip

JASON2节点

[oracle@jason2 ~]# vi /etc/hosts

# Do not remove the following line, or various programs

# that require network functionality will fail.

127.0.0.1 localhost.localdomain localhost

::1 localhost6.localdomain6 localhost6

192.168.12.241 jason1

192.168.12.242 jason2

10.10.10.241 jason1-priv

10.10.10.242 jason2-priv

192.168.12.243 jason1-vip

192.168.12.244 jason2-vip

5.SSH配置

在安装使用Oracle RAC之前，必须在所有节点上为oracle用户配置secure shell（SSH）。安装过程中，OUI程序会使用ssh和scp命令来执行远程命令和拷贝文件到其它节点上。要在安装过程中不输入oracle的用户密码，必须正确配置SSH。要建立用户等效性，请在两个节点上以 oracle 用户身份生成用户的公钥和私钥：

在jason1几点执行

[root@jason1~]# su - oracle

[oracle@jason1~]$ mkdir .ssh

[oracle@jason1~]$ chmod 700 .ssh

[oracle@jason1~]$ cd .ssh

[oracle@jason1.ssh]$ ssh-keygen -t rsa

Generatingpublic/private rsa key pair.

Enterfile in which to save the key (/home/oracle/.ssh/id_rsa):

Enterpassphrase (empty for no passphrase):

Entersame passphrase again:

Youridentification has been saved in /home/oracle/.ssh/id_rsa.

Yourpublic key has been saved in /home/oracle/.ssh/id_rsa.pub.

Thekey fingerprint is:

09:6c:a6:f7:28:6d:f9:19:7f:b7:cf:f4:0d:18:b3:eb oracle@jason1

[oracle@jason1.ssh]$ ssh-keygen -t dsa

Generatingpublic/private dsa key pair.

Enterfile in which to save the key (/home/oracle/.ssh/id_dsa):

Enterpassphrase (empty for no passphrase):

Entersame passphrase again:

Youridentification has been saved in /home/oracle/.ssh/id_dsa.

Yourpublic key has been saved in /home/oracle/.ssh/id_dsa.pub.

Thekey fingerprint is:

60:30:21:ad:88:b5:53:ea:5a:b8:06:13:42:3d:9d:09 oracle@jason1

[oracle@jason1.ssh]$

在jason2节点执行

[root@jason2~]# su - oracle

[oracle@jason2~]$ mkdir .ssh

[oracle@jason2~]$ chmod 700 .ssh

[oracle@jason2~]$ cd .ssh

[oracle@jason2.ssh]$ ssh-keygen -t rsa

Generatingpublic/private rsa key pair.

Enterfile in which to save the key (/home/oracle/.ssh/id_rsa):

Enterpassphrase (empty for no passphrase):

Entersame passphrase again:

Youridentification has been saved in /home/oracle/.ssh/id_rsa.

Yourpublic key has been saved in /home/oracle/.ssh/id_rsa.pub.

Thekey fingerprint is:

cd:9b:c3:e6:03:06:2c:81:da:fd:b3:0c:33:38:bc:27 oracle@jason2

[oracle@jason2.ssh]$ ssh-keygen -t dsa

Generatingpublic/private dsa key pair.

Enterfile in which to save the key (/home/oracle/.ssh/id_dsa):

Enterpassphrase (empty for no passphrase):

Entersame passphrase again:

Youridentification has been saved in /home/oracle/.ssh/id_dsa.

Yourpublic key has been saved in /home/oracle/.ssh/id_dsa.pub.

Thekey fingerprint is:

10:90:91:92:cd:65:7b:d7:dc:a6:65:f4:e7:f1:e2:f2oracle@jason2

[oracle@jason2.ssh]$

切回到jason1执行

[oracle@jason1.ssh]$ ssh jason2 cat ~/.ssh/id_rsa.pub >> authorized_keys

Theauthenticity of host 'jason2 (192.168.12.242)' can't be established.

RSAkey fingerprint is ac:40:85:c2:8d:50:01:e7:71:e6:93:90:8d:8e:d8:08.

Areyou sure you want to continue connecting (yes/no)? yes

Warning:Permanently added 'jason2,192.168.12.242' (RSA) to the list of known hosts.

oracle@jason2'spassword:

[oracle@jason1.ssh]$ ssh jason2 cat ~/.ssh/id_dsa.pub >> authorized_keys

oracle@jason2'spassword:

[oracle@jason1.ssh]$ scp authorized_keys jason2:/home/oracle/.ssh/

oracle@jason2'spassword:

authorized_keys 100% 1996 2.0KB/s 00:00

[oracle@jason1.ssh]$

两台机器互相访问进行测试，最终达到如下效果为正常情况。

[oracle@jason1.ssh]$ ssh jason1-priv date

ThuNov 7 15:20:04 CST 2013

[oracle@jason1.ssh]$ ssh jason1 date

ThuNov 7 15:20:07 CST 2013

[oracle@jason1.ssh]$ ssh jason2-priv date

ThuNov 7 15:20:10 CST 2013

[oracle@jason1.ssh]$ ssh jason2 date

ThuNov 7 15:20:13 CST 2013

[oracle@jason1.ssh]$

[oracle@jason2.ssh]$ ssh jason2-priv date

ThuNov 7 15:20:43 CST 2013

[oracle@jason2.ssh]$ ssh jason2 date

ThuNov 7 15:20:44 CST 2013

[oracle@jason2.ssh]$ ssh jason1 date

ThuNov 7 15:20:47 CST 2013

[oracle@jason2.ssh]$ ssh jason1-priv date

ThuNov 7 15:20:50 CST 2013

[oracle@jason2.ssh]$

6.检查所需软件包

每个节点上都执行如下命令：

#rpm -q binutils compat-db control-center gcc gcc-c++glibc gnome-libs libstdc++ libstdc++-devel make openmotif21

如有个别包没有安装，请务必从光盘找到相关rpm包进行安装。

7.配置内核参数

在所有节点编辑sysctl.conf文件，添加如下内容：

#vi /etc/sysctl.conf

kernel.sem = 250 32000 100 128

kernel.shmmni = 4096

fs.file-max = 101365

net.ipv4.ip_local_port_range = 9000 65500

net.core.rmem_default = 1048576

net.core.rmem_max = 1048576

net.core.wmem_default = 262144

net.core.wmem_max = 262144

要使配置立即生效，执行sysctl –p

8.设置Shell对Oracle用户的限制

在每个节点上执行相同的操作，编辑/etc/security/limits.conf，添加如下内容：

#For Oracle

oracle soft nproc 2047

oracle hard nproc 16384

oracle soft nofile 1024

oracle hard nofile 65536

oracle soft memlock 3145728

oracle hard memlock 3145728

编辑/etc/pam.d/login，添加如下内容：

#For Oracle

session required /lib/security/pam_limits.so

9.配置用户资源限制

在每个节点上执行相同的操作,编辑/etc/profile增加以下内容：

if [ $USER = "oracle" ]; then

if [ $SHELL ="/bin/ksh" ]; then

ulimit -p16384

ulimit -n65536

else

ulimit -u16384 -n 65536

umask 022

10.建立hangcheck模块加载

在所有节点上检测是否安装了hangcheck模块。

[root@jason1 ~]# find /lib/modules -name"hangcheck-timer.ko"

/lib/modules/2.6.18-238.el5/kernel/drivers/char/hangcheck-timer.ko

方法1：设置模块为自动加载

echo“options hangcheck-timer hangcheck_tick=30hangcheck_margin=180”>>/etc/modprobe.conf

echo “modprobe hangcheck” >> /etc/rc.local

方法2：在/etc/rc.local增加以下内容：

[root@jason1 ~]# insmod /lib/modules/2.6.18-238.el5/kernel/drivers/char/hangcheck-timer.ko hangcheck_tick=30 hangcheck_margin=180

检测模块是否运行

[root@jason1 ~]# lsmod |grep hangcheck

hangcheck_timer 37465 0

11.裸设备设置

在jason1上格式化分区，同时确保在jason2上也可以看到这些分区。同时在所有节点上执行1到5步骤配置裸设备。

[root@jason1 ~]# fdisk -l

Disk /dev/sda: 42.9 GB,42949672960 bytes

255 heads, 63 sectors/track,5221 cylinders

Units = cylinders of 16065 *512 = 8225280 bytes

Device Boot Start End Blocks Id System

/dev/sda1 * 1 13 104391 83 Linux

/dev/sda2 14 535 4192965 82 Linux swap / Solaris

/dev/sda3 536 5221 37640295 83 Linux

Disk /dev/sdb: 209 MB,209715200 bytes

64 heads, 32 sectors/track,200 cylinders

Units = cylinders of 2048 *512 = 1048576 bytes

Device Boot Start End Blocks Id System

/dev/sdb1 1 200 204784 83 Linux

Disk /dev/sdc: 209 MB,209715200 bytes

64 heads, 32 sectors/track,200 cylinders

Units = cylinders of 2048 *512 = 1048576 bytes

Device Boot Start End Blocks Id System

/dev/sdc1 1 200 204784 83 Linux

Disk /dev/sdd: 209 MB,209715200 bytes

64 heads, 32 sectors/track,200 cylinders

Units = cylinders of 2048 *512 = 1048576 bytes

Device Boot Start End Blocks Id System

/dev/sdd1 1 200 204784 83 Linux

Disk /dev/sde: 157 MB,157286400 bytes

64 heads, 32 sectors/track,150 cylinders

Units = cylinders of 2048 *512 = 1048576 bytes

Device Boot Start End Blocks Id System

/dev/sde1 1 150 153584 83 Linux

Disk /dev/sdf: 157 MB,157286400 bytes

64 heads, 32 sectors/track,150 cylinders

Units = cylinders of 2048 *512 = 1048576 bytes

Device Boot Start End Blocks Id System

/dev/sdf1 1 150 153584 83 Linux

Disk /dev/sdg: 10.7 GB,10737418240 bytes

255 heads, 63 sectors/track,1305 cylinders

Units = cylinders of 16065 *512 = 8225280 bytes

Device Boot Start End Blocks Id System

/dev/sdg1 1 1305 10482381 83 Linux

Disk /dev/sdh: 10.7 GB,10737418240 bytes

255 heads, 63 sectors/track,1305 cylinders

Units = cylinders of 16065 *512 = 8225280 bytes

Device Boot Start End Blocks Id System

/dev/sdh1 1 1305 10482381 83 Linux

Disk /dev/sdi: 10.7 GB,10737418240 bytes

255 heads, 63 sectors/track,1305 cylinders

Units = cylinders of 16065 *512 = 8225280 bytes

Device Boot Start End Blocks Id System

/dev/sdi1 1 1305 10482381 83 Linux

[root@jason1 ~]#

1)绑定裸设备

在/etc/sysconfig/rawdevices文件中添加以下内容，绑定裸设备：

/dev/raw/raw1 /dev/sdb1

/dev/raw/raw2 /dev/sdc1

/dev/raw/raw3 /dev/sdd1

/dev/raw/raw4 /dev/sde1

/dev/raw/raw5 /dev/sdf1

/dev/raw/raw6 /dev/sdg1

/dev/raw/raw7 /dev/sdh1

/dev/raw/raw8 /dev/sdi1

2)设置开机自启动裸设备服务

#chkconfig–level 345 rawdevices on

3)手工启动rawdevices服务

[root@jason1 ~]# service rawdevices start

Assigning devices:

/dev/raw/raw1 --> /dev/sdb1

/dev/raw/raw1: bound to major 8, minor 17

/dev/raw/raw2 --> /dev/sdc1

/dev/raw/raw2: bound to major 8, minor 33

/dev/raw/raw3 --> /dev/sdd1

/dev/raw/raw3: bound to major 8, minor 49

/dev/raw/raw4 --> /dev/sde1

/dev/raw/raw4: bound to major 8, minor 65

/dev/raw/raw5 --> /dev/sdf1

/dev/raw/raw5: bound to major 8, minor 81

/dev/raw/raw6 --> /dev/sdg1

/dev/raw/raw6: bound to major 8, minor 97

/dev/raw/raw7 --> /dev/sdh1

/dev/raw/raw7: bound to major 8, minor 113

/dev/raw/raw8 --> /dev/sdi1

/dev/raw/raw8: bound to major 8, minor 129

done

[root@jason1 ~]#

4)查看裸设备绑定情况

[root@jason1 ~]# raw -qa

/dev/raw/raw1: bound to major 8, minor 17

/dev/raw/raw2: bound to major 8, minor 33

/dev/raw/raw3: bound to major 8, minor 49

/dev/raw/raw4: bound to major 8, minor 65

/dev/raw/raw5: bound to major 8, minor 81

/dev/raw/raw6: bound to major 8, minor 97

/dev/raw/raw7: bound to major 8, minor 113

/dev/raw/raw8: bound to major 8, minor 129

[root@jason1 ~]#

5)裸设备权限配置

在/etc/rc.local中增加以下内容，以便重启后裸设备拥有合适权限

chown root:oinstall /dev/raw/raw1

chown root:oinstall /dev/raw/raw2

chown root:oinstall /dev/raw/raw3

chown root:oinstall /dev/raw/raw4

chown root:oinstall /dev/raw/raw5

chown oracle:oinstall /dev/raw/raw6

chown oracle:oinstall /dev/raw/raw7

chown oracle:oinstall /dev/raw/raw8

chmod 660 /dev/raw/raw1

chmod 660 /dev/raw/raw2

chmod 660 /dev/raw/raw3

chmod 660 /dev/raw/raw4

chmod 660 /dev/raw/raw5

chmod 644 /dev/raw/raw6

chmod 644 /dev/raw/raw7

chmod 644 /dev/raw/raw8

注：在jason2

12.ASM磁盘配置

ASMLIB下载地址

根据当前系统内核版本下载对应的ASM包,在所有节点进行安装。

1)、ASMlib安装

在所有节点进行安装ASMlib。

[root@jason1 mnt]# rpm -ivh oracleasm-support-2.1.8-1.el5.x86_64.rpm

warning: oracleasm-support-2.1.8-1.el5.x86_64.rpm:Header V3 DSA signature: NOKEY, key ID 1e5e0159

Preparing... ###########################################[100%]

1:oracleasm-support ########################################### [100%]

[root@jason1 mnt]# rpm -ivh oracleasm-2.6.18-238.el5-2.0.5-1.el5.x86_64.rpm

warning: oracleasm-2.6.18-238.el5-2.0.5-1.el5.x86_64.rpm:Header V3 DSA signature: NOKEY, key ID 1e5e0159

Preparing... ########################################### [100%]

1:oracleasm-2.6.18-238.el###########################################[100%]

[root@jason1 mnt]# rpm -ivh oracleasmlib-2.0.4-1.el5.x86_64.rpm

warning: oracleasmlib-2.0.4-1.el5.x86_64.rpm:Header V3 DSA signature: NOKEY, key ID 1e5e0159

Preparing... ########################################### [100%]

1:oracleasmlib ########################################### [100%]

[root@jason1 mnt]#

2)、ASM磁盘驱动配置

在所有节点执行如下配置。

[root@jason1 init.d]# /etc/init.d/oracleasm configure

Configuring the Oracle ASM library driver.

This will configure the on-boot properties of the OracleASM library

driver. Thefollowing questions will determine whether the driver is

loaded on boot and what permissions it will have. The current values

will be shown in brackets ('[]'). Hitting <ENTER> without typing an

answer will keep that current value. Ctrl-C will abort.

Default user to own the driver interface []: oracle

Default group to own the driver interface []: dba

Start Oracle ASM library driver on boot (y/n) [y]: y

Scan for Oracle ASM disks on boot (y/n) [y]: y

Writing Oracle ASM library driver configuration: done

Initializing the Oracle ASMLib driver: [ OK ]

Scanning the system for Oracle ASMLib disks: [ OK ]

[root@jason1 init.d]# /etc/init.d/oracleasm enable

Writing Oracle ASM library driver configuration: done

Initializing the Oracle ASMLib driver: [ OK ]

Scanning the system for Oracle ASMLib disks: [ OK ]

[root@jason1 init.d]#

3)、创建ASM磁盘

仅在其中一个节点上创建ASM磁盘

[root@jason1 init.d]# /etc/init.d/oracleasm creatediskVOL1 /dev/sdg1

Marking disk "VOL1" as an ASM disk: [ OK ]

[root@jason1 init.d]# /etc/init.d/oracleasm creatediskVOL2 /dev/sdh1

Marking disk "VOL2" as an ASM disk: [ OK ]

[root@jason1 init.d]# /etc/init.d/oracleasm creatediskVOL3 /dev/sdi1

Marking disk "VOL3" as an ASM disk: [ OK ]

[root@jason1 init.d]

注意：用于asm的设备必须已经分区的设备（裸分区），不能直接是裸设备。

4)、扫描ASM磁盘

创建ASM磁盘只需要在一个节点执行，其余节点需要执行asm磁盘扫描才能找到磁盘。。

[root@jason2 init.d]# /etc/init.d/oracleasm scandisks

Scanning the system for Oracle ASMLib disks: [ OK ]

[root@jason2 init.d]# /etc/init.d/oracleasm listdisks

VOL1

VOL2

VOL3

[root@jason2 init.d]#

转载于:https://blog.51cto.com/369day/1328244

你可能感兴趣的文章

企业专属云计算平台落地，助力企业实现数字化转型

查看>>

多线程通信的三大法器，你真的会用吗？

查看>>

Python爬虫--- 1.4 正则表达式：re库

查看>>

Xcode 10 升级导致项目报错的常见问题

查看>>

我们来说一说TCP神奇的40ms

查看>>

[LeetCode] 97. Interleaving String

在SAP UI中使用纯JavaScript显示产品主数据的3D模型视图

【Leetcode】82. 删除排序链表中的重复元素 II

【DL-CV】浅谈GoogLeNet（咕咕net）

查看>>

【许晓笛】详解 EOS 的新共识机制 BFT-DPoS

查看>>